Removing Stock Air Box from Durango Hellcat

There are only 5 steps involved.

1. Loosen the clamp that seals the rubber boot to the supercharger throttle body.
2. Remove the electrical connector from the MUA on the airbox.
3. Remove the breather hose connector from the MUA on the airbox.
4. Remove the electrical connector from the IAT sensor on the intake boot.
5. Lift the airbox from the vehicle and slide away from the throttle body. There are three rubber grommets attached to the underside of the airbox.

That’s all there is to it. Simple and fast.

Below is information about the MSU and IAT.